A-A-52407A
4. REGULATORY REQUIREMENTS.
4.1 Recovered material. The offeror/contractor is encouraged to use recovered materials to the maximum extent practicable, in accordance with paragraph 23.403 of the Federal Acquisition Regulation (FAR).
5. QUALITY ASSURANCE PROVISIONS.
5.1 Responsibility for inspection. The contractor is responsible for the performance of all inspections (examinations and tests).
5.2 Product conformance. The products shall meet the salient characteristics of this CID, conform to the producer’s own drawings, specifications, standards, and quality assurance practices, and be the same product offered for sale in the commercial market. The Government reserves the right to require proof of such conformance.
6. PACKAGING. Preservation, packing, and marking shall be as specified in the contract or order (see 7.3).
7. NOTES
(This section contains information of a general or explanatory nature that may be helpful, but is not mandatory.)
7.1 Part or Identification Number (PIN). The following part identification numbering procedure is for Government purposes and does not constitute a requirement for the contractor. The PINs to be used for the glass, filtered, colored acquired to this CID are created as follows:
AA 52407 X
X- Grade (see 2)
52407- CID Number
AA- CID Designates
7.2 Addresses for obtaining copies of referenced documents.
7.2.1 Addresses for obtaining copies of referenced Non-Government publications. Copies of American Society for Testing and Materials (ASTM) C336 “Method for Annealing Point and Strain Point for Glass by Fiber Elongation”; ASTM C338 “Softening Point of Glass”; ASTM D542 “Index of Refraction of Transparent Organic Plastics”; ASTM D792 “Density and
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business